Understand the common specifications of car charging pile cables

 Product description: The selection of car charging pile cable specifications depends on multiple factors, mainly related to the power of the charging pile and the power supply method. ​

For common AC slow charging piles, if the power is 3.5kW, the corresponding current is about 16A, and 3×4mm² cables are generally selected. When the power is increased to 7kW, the current is about 32A. At this time, it is recommended to use 3×6mm² cables. This is because as the power increases, the current load increases, and thicker cables can reduce resistance, reduce power loss and heat generation. ​

DC fast charging piles have higher power and more stringent requirements on cable specifications. A DC pile with a power of 30kW and a current of about 46A requires a 10mm² cable; a DC pile with a power of 60kW and a current of 92A requires a 25mm² cable; and a DC pile with a current of 90kW and a current of 120A, the cable specification should be 35mm². ​

In addition, the supply voltage also affects the cable selection. If it is a 220V single-phase power supply, the cable specifications are usually larger than those of a 380V three-phase power supply. In actual applications, the cable laying distance must also be considered. The longer the distance, the larger the cable specifications may need to be appropriately increased to ensure the charging effect.

The above is the product introduction of OMG professional cable manufacturer, for reference only. Please consult the specific product specifications according to the actual situation. Welcome to: https://www.omgevcable.com